top of page
SUGAWARA Laboratories Inc. 菅原研究所 株式会社
1) LOOM STROBO. Type : NS-5WB
Catalogue Download NS-5W
Loom Strobo for making good fabrics......
Features :
★ Drip-proof construction : This constructionensure safety operation even, when the device is exposed to water jet stream.
★ Monitoring of the following various states enabled :
① Weft thrusting angle. ② Timing of shedding. ③ Weft motion. ④ Pump motion.
⑤ States of various portions.
★ Monitoring of woven pattern enabled : Monitoring according to fabric specification (woven pattern) become possible by the dividing function (dividing ratio 1/1, 1/2, 2/4 & 1/4)
★ Convenient "Zero" reset.
Desired crank angle can be read out immediately by the "Zero" reset enabling voluntary
re-setting of zero point.
★ Measurement of rotation number enabled. The device can be used as the high precision tachometer.
Specifications :
Measuring range : 60 ～ 1500rpm. every 1 rpm steps
Delay angle : 0 ～ 359 deg. every 1 deg. steps
Input signal : Low level -15 ～ 1.5V. High level : 3.5 ～ 15V (Plus edge trigger)
Display function : 4 digits. 7-segment LED.
Xenon tube used : FX-6L.
Discharge tube input : Approx. 5W
Power supply : AC 90V ～ 132V. 50 ～ 10 kHz.
Dimension and weight : 134(W) x 135(H) x 225(D) mm. Approx. 1.2kgs.
Cable (include) : 1C3-061 (For power supply & signal)
Condition : Brand new
Discontinue Product
2) LOOM STROBO. Type : CS-12 (Modified product)
Stroboscope. type : CS-12 (Modified product by maker)
External sync frequency range : up to 1200rpm
Delay time : 50ms ～ 200ms.
Xenon tube used : FX-6L.
Power supply : AC 100V +/-10%.
Frequency : 50Hz/60Hz.
Power consumption : less than 20VA.
Operating temperature : 0°C ～ +40°C
Dust proof - drip proof. IP42.
Dimension and weight : 152(W) x 181(H) x 194(D) mm. Approx. 1.8kgs
Cable (include) : 8CS-901-702
Condition : Brand new
Discontinue Product
3) SUGAWARA special Xenon tube. type : FX-6L
_edited.jpg)
Use for Sugawara Stroboscope,
type : DS-4AA / DS-4BA / DS-4CA and NS-5WB / CS-12
bottom of page